A Y strainer
The Y-strainer is a small device that removes a few solid particles in the liquid, which can protect the normal operation of the equipment. When the fluid enters the filter cartridge with a filter screen certain specification, its impurities are blocked, and the pure liquid is discharged from the outlet of the filter. When we need to clean the Y-strainer, we just need to take out the detachable filter cartridge and reinstall it after cleaning. Therefore, it is extremely convenient to use and maintain the Y-strainer. A Y-strainer is an indispensable device in the pipeline system of conveying medium. Its function is to filter the mechanical impurities in the medium. It can filter the rust, sand, and a few solid particles in the media to protect the component on the equipment pipeline from wear and blockages, which can protect the normal operation of the equipment.
The Y-strainer has a Y shape. One end of the Y-strainer is for water and other liquids to pass through, and the other end is for subsiding waste and impurities. Usually, it is installed at the inlet of a pressure reducing valve, a pressure relief valve, level control valve, or other equipment to remove impurities in the water and protect valves and equipment. The water to be treated by the filter enters the body through the water inlet, and the impurities in the water are deposited on the stainless steel filter screen, resulting in a pressure difference. The pressure difference between the inlet and outlet is monitored by the pressure difference switch. When the pressure difference reaches the set value, the electronic controller sends the hydraulic control valve and drive motor a signal to trigger the following actions: the motor drives the brush to rotate to clean the filter element. Meanwhile, the control valve is opened to discharge the sewage. The entire cleaning process only lasts for tens of seconds. When the cleaning is done, the control valve is closed, and the motor stops rotating. The system returns to its initial state and starts the next filtration process. After the equipment is installed, the technicians will test and set the filtering time and cleaning conversion time. The water to be treated enters the body through the water inlet, and the filter starts to work normally.
Basic parameters
Medium temperature: 300 ℃
Working pressure difference: 2KG
Material: stainless steel
Product name: Y-strainers
Scopes of applications: filtering liquids
Connection form: flange connections
Type: right-angle type
Flow direction: one way
Applicable medium: water
Pressure environment: normal pressure
The structure diagram of a Y-strainer
As indispensable high-efficiency filtration equipment in purification equipment engineering, the Y-strainer has played a great role in the treatment of wastewater, sewage, and industrial sewage. With various advantages in design and application, it is now highly favored. The Y-strainer is used in various industries to effectively treat a large amount of domestic and industrial sewage, so that valuable water resources are effectively reused and a lot of water resources are saved. The advantages of a Y-strainer in operation include full automation, maintenance-free, large filtering areas, high filter efficiency, long service life, stainless steel materials, optional filtering accuracy, and complete specifications, which is one of the most effective devices in the reuse of recycled water project compared with other filtration equipment. Moreover, the water quality after being treated by the Y-strainer not only meets the national emission standards, but the water also achieves the purpose of repeated and recycling use.
Next: Repair of Gate Valves
Previous: Notes for Quick Installation of Ball Valves